Clamps and Vises

You can never have enough clamps!

In any workshop you can never have enough clamps. Now is you chance with this fine range of clamps at sensible prices

!

4 Way Pressure Clamp
Just
+Shipping charges
!
4way_320x210

Clamp Boards with 4 way pressure

SORRY SOLD OUT

This kit comes with all the parts (except wood) necessary to creat a fantastic 4 way pressure clamp
This inovative design applies pressure from all side during glue-ups. Help prevent warping and bowing of panels doors etc. Great value and quality.
These clamps apply equal pressure from all 4 directions
at once from top, bottom, and both sides saving the workpiece from accidental distortion.
Adjustable sizes, up to 6" thick and has 6" long
nonmarring jaw faces.

Carvers Vise
+Shipping charges
!
cv01_320x210
Excellent Quality Carvers Vise
Vise opening is up to 4" thick.
The vise's design allows the 4" face plate to be raised, lowered, swung, and rotated to virtually any position.
The mounting plate assembly is designed to be on either the right or left side of the vise

12 " Borg Clamp
Only
+Shipping charges
!
borg
These parallel-jaw bar clamps are valued for quick,
accurate clamping of panels,carcasses and frameworks.

These parallel-jaw bar clamps are valued for quick, accurateclamping of panels,carcasses and frameworks.
The end stop on the steel bar helps stabilize the clamp during use and detaches to resverse the screw
jaw for spreading purposes.The comfortable screw handle is compound material.

There are over 5 aquare inches of usable urface per jaw,which eliminates the need for gluing shims.
You need fewer clamps for a job.
They maintain the squareness of the item being clamped.
The steel jaws are clad with a high-impact plastic that is non-marking and glue resistant.
They can be used with the clamped material parallel to the bar flat,which is very handy for large flat pieces.
Reinforced steel and castings are protected with orange plastic.
Multiple disc clutch uses hardened,plated,high carbon steel plates with round edges.

24" Borg Clamp
Only
+Shipping charges
!
borg
These parallel-jaw bar clamps are valued for quick,
accurate clamping of panels,carcasses and frameworks.

These parallel-jaw bar clamps are valued for quick, accurateclamping of panels,carcasses and frameworks.
The end stop on the steel bar helps stabilize the clamp during use and detaches to resverse the screw
jaw for spreading purposes.The comfortable screw handle is compound material.

There are over 5 aquare inches of usable urface per jaw,which eliminates the need for gluing shims.
You need fewer clamps for a job.
They maintain the squareness of the item being clamped.
The steel jaws are clad with a high-impact plastic that is non-marking and glue resistant.
They can be used with the clamped material parallel to the bar flat,which is very handy for large flat pieces.
Reinforced steel and castings are protected with orange plastic.
Multiple disc clutch uses hardened,plated,high carbon steel plates with round edges.

31" Borg Clamp
Only
+Shipping charges
!
borg
These parallel-jaw bar clamps are valued for quick,
accurate clamping of panels,carcasses and frameworks.

These parallel-jaw bar clamps are valued for quick, accurateclamping of panels,carcasses and frameworks.
The end stop on the steel bar helps stabilize the clamp during use and detaches to resverse the screw
jaw for spreading purposes.The comfortable screw handle is compound material.

There are over 5 aquare inches of usable urface per jaw,which eliminates the need for gluing shims.
You need fewer clamps for a job.
They maintain the squareness of the item being clamped.
The steel jaws are clad with a high-impact plastic that is non-marking and glue resistant.
They can be used with the clamped material parallel to the bar flat,which is very handy for large flat pieces.
Reinforced steel and castings are protected with orange plastic.
Multiple disc clutch uses hardened,plated,high carbon steel plates with round edges.

4" Spring Clamp
Just
+Shipping charges
!
03j31_320x210
Buy 4 and Get One Free!
Great Value Zinc Coated Steel 4" Spring Clamp

These spring clamps are made of zinc coated steel and are then vinyl coated to protect your work.
Not to be confused with some cheap plastic clamps.

These  very strong spring clamp has a maximum jaw opening of 1.5". The heavy duty rust resistant steel body has rubber grips for comfort and no mar rubber jaws to protect the workpiece. Measuring 4" in length they are ideal for clamping odd sized and shaped projects.

6" Spring Clamp
Just
+Shipping charges
!
03j31_320x210
Buy 4 and get a 4" Clamp Free!
Great Value Zinc Coated Steel 6" Spring Clamp

These spring clamps are made of zinc coated steel and are then vinyl coated to protect your work.
Not to be confused with some cheap plastic clamps.

These  very strong spring clamp has a maximum jaw opening of 2". The heavy duty rust resistant steel body has rubber grips for comfort and no mar rubber jaws to protect the workpiece. Measuring 6" in length they are ideal for clamping odd sized and shaped projects.

9" Spring Clamp
Just
+Shipping charges
!
03j31_320x210
Buy 4 Get a Free 6" Clamp Free!
Great Value Zinc Coated Steel Spring Clamp
Buy 4 get a 6" Clamp Free!
These spring clamps are made of zinc coated steel and are then vinyl coated to protect your work.
Not to be confused with some cheap plastic clamps.

These  very strong spring clamp has a maximum jaw opening of 3". The heavy duty rust resistant steel body has rubber grips for comfort and no mar rubber jaws to protect the workpiece. Measuring 9" in length they are ideal for clamping odd sized and shaped projects.